cardmaking

Congrats floral card

Hello crafty friends!

I am up on the papermilldirect blog with a lovely floral congratulations card. I never seem to have a congratulations card when I need one so I’ve made a few of these for my stash.

Here’s the tutorial:

You will need:

You will also need:

  • Floral stamp (Uniquely Creative)
  • Congrats Die
  • Watercolour paints
  • Waterproof Ink Pad
  • Gems

Pmdcongrats

To make the card base I trimmed down a piece of White Card Super Smooth 250gsm to 4 1/4 and I scored this at 5 7/8″ inches. I then trimmed down a smaller piece of White Card Super Smooth 250gsm as my card front. I added a few splatters of pink and purple watercolour to my card front and while this dried I stamped the floral images onto some more White Card Super Smooth 250gsm. I used a waterproof ink pad so that when I coloured the flowers in with the paint the ink wont spread and make a mess. I only used a small amount of water too.

Once the floral images are dry cut them out and place onto your card front using some Stick it! 3D Foam Tape 9mm.

Using the congrats die I die cut the word using some Flamingo Pink Non-Shedding Glitter Card 285gsm and adhered this onto the card base using Anita’s PVA Tacky Glue 60ml.

I then added some Stick it! 3D Foam Tape 9mmto the whole back of the card front and adhered this onto the card base.

To finish off the card I added some little gems which I stuck down with some Anita’s PVA Tacky Glue 60ml. I then made an envelope using a piece of Baby Pink Plain Card 240gsm.

I hope this has helped you with creating a pretty congrats card. You can change the greeting to other sentiments too. I think this would look pretty as a birthday card too.

Thanks for stopping by

Have a lovely day!

Vic

cardmaking

Crikey old mate!

Hello crafty friends.

I have a fun koala card on the papermilldirect blog today. I wanted to make a dark background with some leaves and coloured them in.

I love making people laugh and this sweet Koala card is sure to bring a smile to someone’s face. 

You will need:

You will also need:

Pmdd

To make the card base I trimmed down a piece of Black Plain Card 240gsm to 4 1/4 inches and then scored the card at 5 7/8 inches.

Next I trimmed the card front piece using White Card Super Smooth 250gsm. I trimmed this a little bit smaller than the card base. I then used the large leaf die and stamped a background of leaves. Using some green copic markers I coloured all the leaves in. I then used a dark grey and black marker to colour the whole background in. This does take time but I think its really worth it as I had lots of fun colouring the background. I then used some Stick it! 3D Foam Tape 9mm and adhered this to my card base.

Next I stamped the koalas onto a piece of White Card Super Smooth 250gsm and coloured them in. I then trimmed them out and started die cutting some leaves. I used a piece of Xmas Green Double Sided Pearlised Card 300gsm for this. I then adhered the leaves and koalas down with some Stick it! 3D Foam Tape 9mm and Anita’s PVA Tacky Glue 60ml.

Next I heat embossed the sentiments using white embossing powder onto some more Black Plain Card 240gsm. I trimmed these down and adhered onto the card with some Stick it! 3D Foam Tape 9mm.

To finish the card off I added some gems.

I hope this inspires you to make your own background.

Thank you for stopping by today

Vic

cardmaking

Party time!

Hello again!

I have s sweet birthday card up on the papermilldirect blog today. It’s always fun making birthday cards. Here’s the tutorial:

I love making fun and colourful cards especially birthday cards. I have a really fun shaker card for you today. 

You will need:

You will also need:

  • Critter stamps
  • Acetate 
  • Sequins and Gems
  • White Embossing Powder
  • Pink Embossing Powder
  • Heat Gun
  • Versafine Ink
  • Copic Markers
  • Circle die

Party

To make the card base I trimmed down a piece of Turquoise Cumbria Colour Card 270gsm to 4 1/4 inches and scored this at 5 7/8 inches. I then trimmed another piece of card 4 1/4 inches by 5 7/8 inches so that this piece will sit on the card base.

Using this piece of card and a circle die run this through the die cutting machine so you will have a circle cut out in the center of your card. Turn the piece of card over and use Anita’s PVA Tacky Glue 60ml or Stick it! Double Sided Tape 6mmand add this around the edge of the circle. Place your piece of acetate over this and let the glue dry. Once dry use some Stick it! 3D Foam Tape 9mm and run this around the edge of the circle. Fill the circle up with sequins and gems and adhere to the card base.

Using a piece of White Card Super Smooth 250gsm stamp and colour all your images and colour them in. Trim them out and adhere to the card using Stick it! 3D Foam Tape 9mm.

On another piece of Turquoise Cumbria Colour Card 270gsm stamp the greeting and heat emboss this with white embossing powder. On another piece of White Card Super Smooth 250gsm stamp and heat emboss a birthday greeting and adhere both to your card.

To finish the card off add some extra sequins or gems.

Thanks so much for stopping by today!

Vic

cardmaking

Bloom card

Hello crafty friends.

I have a pretty bloom card up on the Papermilldirect blog. I love using different colours of card and making bright cards.

For this card you will need:

You will also need:

  • Floral Stamp (Uniquely Creative)
  • Copic Markers
  • Score tool and ruler
  • Heat Gun
  • Versamark Ink
  • White Embossing Powder
  • Birthday Sentiment (Uniquely Creative)
  • Sequins

Pmdbday

To start with I made my card base using a piece of Apple Green Card Plain 240gsm which I trimmed down to 4 1/4″ and scored at 5 7/8 inches. I then trimmed down a smaller piece of Baby Pink Plain Card 240gsm. Using a ruler and scoring tool I added some embossed lines. I adhered this to my card base using some Stick it! 3D Foam Tape 9mm.

I then stamped and coloured my floral image onto some White Card Super Smooth 250gsmand trimmed this out. I then adhered this image to the middle of my card using some more Stick it! 3D Foam Tape 9mm.

Next I heat embossed the greeting onto a piece of Black Plain Card 240gsm and adhered this onto my card.

To finish off the card I added some sequins and adhered these down using some Anita’s PVA Tacky Glue 60ml.

I hope this card inspires you to make something today.

Happy crafting!

Vic

cardmaking

Thinking of you

Hello friends!

I have a thinking of you card up on the papermilldirect blog today.

I love using my copic markers but unless its a copic friendly card it will run and bleed and completely ruin your colouring. I thought I would try colouring on the Sirio Colour Card and I couldn’t believe that it didn’t run the colour from the markers! I’m so impressed!

To make this card you will need:

You will also need:

  • Floral Stamps (Uniquely Creative)
  • Sentiment (Uniquely Creative)
  • Copic Markers
  • Gems
  • White Embossing Powder
  • Heat Gun
  • Versamark Ink

Pmthinking

To start with I made my card base using Perla Sirio Colour Card 290gsm which I trimmed at 4 1/4″ and scored at 5 7/8″. I then trimmed down a piece of Nude Sirio Colour Card 290gsm a little bit smaller than the card front.

Next I stamped some floral branches onto the Nude Sirio Colour Card 290gsm to make a background. Once this was completed I coloured in the branches with my copic markers. I honestly thought the colour would bleed a little bit and I was so happy when it didn’t. I will definitely be doing this technique again.

Once all the branches were coloured in I adhered this onto my card base using Stick it! 3D Foam Tape 9mm.

I then heat embossed the sentiment onto a piece of Navy Plain Card 240gsm and trimmed this down. I adhered to my card using some Stick it! 3D Foam Tape 9mm.

To finish the card off I adhered some gems onto the card using some Anita’s PVA Tacky Glue 60ml.

I hope you give this a try and don’t be scared to experiment with different cards and your markers.

Thanks for stopping by today.

Vic

cardmaking

Thanks heaps

Hi there!

I have a sweet shaker card up on the Papermilldirect blog for you today.

I love making shaker cards they just seem to add even more fun to your cards.

You will need:

You will also need:

Thanksheaps

To make the card base I trimmed down a piece of Baby Pink Plain Card 240gsm to 4 1/4″ and scored at 5 7/8″. I then trimmed down another piece that was exactly the same size as the card front. Using this piece if card I run this through the die cutting machine using a circle die. I the die cut another small circle frame using some New Lilac Smooth Card 240gsm. I the turned this piece over and using some Stick it! Double Sided Tape 6mm I adhered the acetate over the circle back. I then added Stick it! 3D Foam Tape 9mm all around the edge and filled the center up with sequins and gems. I adhered this to m y card front using some more Stick it! 3D Foam Tape 9mm. I then used some Anita’s PVA Tacky Glue 60ml to adhere down the New Lilac Smooth Card 240gsm circle die.

Using a piece of White Card Super Smooth 250gsm I stamped and carefully water coloured the images in. Once dry I trimmed them out and adhered down onto the shaker card.

I then heat embossed the sentiment onto a piece of Turquoise Cumbria Colour Card 270gsm and adhered this onto my card.

To finish the card off I added some more gems which I adhered down using Anita’s PVA Tacky Glue 60ml.

I hope you have fun making some shaker cards!

Thanks for stopping by

Vic

cardmaking

Take time to make your soul happy

Hello crafty friends. I have a very sweet card on the Papermilldirect blog today.

You will need:

 Black Plain Card 240gsm

 Ardesia Materica Card 250gsm

 White Card Super Smooth 250gsm

 Stick it! 3D Foam Tape 9mm

 Anita’s PVA Tacky Glue 60ml

You will also need:

White watercolour paint

Critter Stamps, sentiment, cloud die (Uniquely Creative) I have used the Hey Papa stamp set and the Inspirational sentiment stamp set

Circle Die

Copic Markers

Sequins and Gems

Acetate

To make the card base I used a piece of Ardesia Materica Card 250gsm which I trimmed at 4 1/4 inches and scored at 5 7/8 inches. I then trimmed a piece of Black Plain Card 240gsm to the same size as the card front. I added splatters of white paint to this. Using this piece die cut a circle in the middle of your card. Turn over and adhere acetate to the back. You can use Anita’s PVA Tacky Glue 60ml you will just need to wait for the glue to dry. Once this is dry go all around the circle edge with Stick it! 3D Foam Tape 9mmand add the sequins and gems into the circle, Place your card base over this and adhere them both together.

Next I stamped and coloured my images onto some White Card Super Smooth 250gsm and trimmed them out. I then adhered them onto the card base.

Next I die cut the cloud with some more White Card Super Smooth 250gsm and added some eyes and a mouth. I then adhered this to my card with Stick it! 3D Foam Tape 9mm.

For the greeting I used some more Black Plain Card 240gsm and heat embossed the sentiment. I then trimmed this down and adhered to the card with Stick it! 3D Foam Tape 9mm.

To finish the card off I added some more gems and sparkles. I really like how this turned out. I hope you feel inspired to make something today.

Thank you for stopping by today!

Happy stamping!

Vic

cardmaking

Summer shaker card

Hello friends!

I have made a fun summer shaker card using Mommy Lhey summer and tails digital kit and Mommy Lhey Under The Sea digital kit.

I love the images so much and thought it would be fun to make a bright card with them.

I crammed blue sequins into the shaker part so it looks like a pool because we all know mermaids love to swim in sequins.

I also used some bright colours of card from Papermilldirect turquoise Cumbria , Daffodil plain card and Raspberry pink plain card.

I thought the colours would really suit the images.

Thanks for popping by today

Vic

cardmaking

Sweet critter birthday card

Hi crafty friends,

I have this adorable card up on the Papermilldirect blog today.

You will need:

You will also need:

  • Critter Stamps (Hello Bluebird)
  • Copic Markers
  • Nuvo Drops
  • Grass Die & Cutting Machine

For the card base I used a piece of White Card Super Smooth 250gsm which I trimmed at 4 1/4″ and scored at 5 7/8″ inches. I then trimmed down a piece of Nude Sirio Colour Card 290gsma little smaller than the card base and adhered this piece to the card base using Stick it! Double Sided Tape 6mm.

Using some Acquamirine Nettuno Linen Effect Card 280gsm I die cut some grass hills and adhered this to the bottom of the card.

I then stamped my images onto a piece of White Card Super Smooth 250gsm and coloured them in with my copic markers. I trimmed these out and adhered them onto the card with Stick it! 3D Foam Tape 9mm.

To finish off the card I added some Nuvo Drops.

I love how soft the colours of card are I think they look really pretty together.

have a lovely day!

Vic

cardmaking

A cute cactus card

Hello crafty friends!

Hope your having a good start to the week. I have a sweet card on the Papermilldirect blog today.

Here’s the tutorial:

Cactus1

You will need:

You will also need:

  • Mommy Lhey Pokey Green Digital Kit
  • Pigment Inks ( Yellow & Green)
  • Star Stencil and Sponge applicator
  • White Embossing Powder (WOW)
  • Heat Gun
  • Versamark Ink
  • Hearts Die
  • Nuvo Drops

Cactus

To make the card base I trimmed down a piece of Daffodil Plain Card 290gsm to 4 1/8″ inches by 5 7/8″. I then trimmed down a smaller piece of White Card Super Smooth 250gsm smaller than the card base. I gently applied some pigment ink around the edges and using the star stencil I applied some pigment ink over the stencil.

I then adhered the whole piece of card onto my card base using some Stick it! Double Sided Tape 6mm.

I then printed and trimmed out some cactus images and I used a piece of White Card Super Smooth 250gsm that I ran through the printer. I trimmed them out and adhered them onto the center of the card using Stick it! 3D Foam Tape 9mm.

For the sentiment I heat embossed the greeting onto some Mandarin Orange Plain Card 240gsmand adhered a piece of Green Non-Shedding Glitter Card 285gsm just behind the sentiment and adhered this onto the card.

To finish off the card I die cut some small hearts with some Ruby Red Plain Card 240gsm and adhered them onto the card with some Anita’s PVA Tacky Glue 60ml. I also added some Nuvo drops.

I think the bright colours of the card are so lovely and will hopefully bring a smile to the recipients face.

Have a great Monday!

Vic